Categories
Contact Us

Contact: Jordan Tang
Tel: +86-21-63161632
Mobile: +8613918216784
Whatsapp: +8613918216784
Email: info@tongyue-group.com
Website: www.etfaceclutch.com


Service Hotline
+8613918216784

News

Home > NewsContent

Clutch Release Bearing Ensures Smooth Clutch Engagement

Shanghai ET Auto Parts Co.,Ltd | Updated: Jun 01, 2017

Clutch release bearing is a more important part of the car, if the maintenance is not good failure, not only will cause economic losses, and disassembly a very troublesome, need to spend a lot of work. Therefore, to clarify the reasons for the failure of the clutch release bearing, and in the use of reasonable maintenance and maintenance, to extend the life of the separation of bearings, improve labor productivity, Clutch Release Bearing and achieved good economic benefits are of great significance.

The clutch release bearing is mounted between the clutch transmissions and the release bearing is loosely fitted over the tubular extension of the first shaft bearing cap of the transmission, and the shoulder of the release bearing is always abutted against the separation fork by the return spring and retracted to the final position , Clutch Release Bearing And the separation lever to maintain a gap of about 2.5mm.

As the clutch plate, the separation lever and the engine crankshaft synchronous operation, and the separation fork can only move along the clutch output shaft, directly with the separation fork to pull the separation lever is clearly not, through the separation of bearings can make the side of the separation of the clutch side The output shaft is moved axially to ensure that the clutch is able to engage smoothly, to separate the softness, Clutch Release Bearing to reduce wear and to extend the service life of the clutch and the entire driveline.

The clutch release bearing is mounted between the clutch and the transmission, and the release bearing is loosely fitted over the tubular extension of the first shaft bearing cap of the transmission, Clutch Release Bearing and the shoulder of the release bearing is always abutted against the separation fork by the return spring and retracted to the last position , And the separation lever end (separation means) to maintain a gap of about 3 ~ 4mm.

As the clutch pressure plate, the separation lever and the engine crankshaft synchronous operation, and the separation fork can only move along the clutch output shaft, directly with the separation fork to pull the separation lever is clearly not work, by separating the bearing can make the separation lever side of the rotation The clutch output shaft moves axially to ensure that the clutch is able to engage smoothly, separates soft, Clutch Release Bearing reduces wear and extends the life of the clutch and the entire drive train.