Categories
Contact Us

Contact: Jordan Tang
Tel: +86-21-63161632
Mobile: +8613918216784
Whatsapp: +8613918216784
Email: info@tongyue-group.com
Website: www.etfaceclutch.com


Service Hotline
+8613918216784

News

Home > NewsContent

The Clutch Releases The Bearing's Role

Shanghai ET Auto Parts Co.,Ltd | Updated: Aug 25, 2017


Clutch release bearing is an important part of the car, installed between the clutch and the transmission, due to the clutch pressure plate, the separation lever and the engine crankshaft synchronous operation, in order to ensure that the clutch can be connected smooth, soft, reduce wear and tear, extend the clutch and the whole The life of the drive train requires the separation of the bearing by allowing the separation lever to rotate axially along the clutch output shaft. Clutch release bearing disassembly is more complex, time-consuming, this, Clutch Release Bearing the choice of high reliability, quality guaranteed bearings, and in the use of reasonable maintenance and maintenance, can extend the bearing life and improve the user's economic efficiency.

Clutch release bearing is a more important part of the car, if the maintenance is not good failure, not only will cause economic losses, and disassembly a very troublesome, need to spend a lot of work. Therefore, to clarify the reasons for the failure of the clutch release bearing, Clutch Release Bearing and in the use of reasonable maintenance and maintenance, to extend the life of the separation of bearings, improve labor productivity, and achieved good economic benefits are of great significance.

First, the clutch release bearing the role

The clutch release bearing is mounted between the clutch transmissions and the release bearing is loosely fitted over the tubular extension of the first shaft bearing cap of the transmission, Clutch Release Bearing and the shoulder of the release bearing is always abutted against the separation fork by the return spring and retracted to the final position , And the separation lever to maintain a gap of about 2.5mm.

As the clutch plate, the separation lever and the engine crankshaft synchronous operation, and the separation fork can only move along the clutch output shaft, directly with the separation fork to pull the separation lever is clearly not, through the separation of bearings can make the side of the separation of the clutch side The output shaft is moved axially to ensure that the clutch is able to engage smoothly, to separate the softness, to reduce wear and to extend the service life of the clutch and the entire driveline.

Second, the release of the clutch requirements of the clutch

Clutch release bearing movement should be flexible, no sharp sound or stuck phenomenon, the axial clearance shall not exceed 0.60mm, Clutch Release Bearing the inner ring wear shall not exceed 0.30mm.

Clutch release bearing is a bearing bearing (commonly known as clutch ball plate), its role is to depress the clutch pedal to withstand the spring thrust plate or drive plate to move the clutch shell direction, that is to say when the clutch pedal The vibrating separation lever is used to overcome the thrust of the platen spring to complete the separation of the clutch.